WCX Series XYR 6000 Position Sensor
50040850
Issue 3
5. Start Up
5.2. Display sequence
5.2 Display sequence
After power up, the sensor does a brief self-test of the LCD display. Then it proceeds to power-on message, which
is the model name of the sensor. The name is displayed for 2 seconds after which the sensor displays the process
variables and associated status.
5.3 Authentication
Before the sensor can be configured it must be unlocked with a security key so it can join the network. Use the
Authentication Device Pocket PC software to receive security keys from the Key Server manager, then aim the
Pocket PC at the sensor and transmit a key.
See Getting Started with Honeywell OneWireless™ Solutions for more information.
5.4 Calibration
See the WCX Series Sensor User's Manual for calibration procedures.
Honeywell • Sensing and Control
21