WCX Series XYR 6000 Position Sensor
1. Introduction
1.3. Certifications and approvals
1.3 Certifications and approvals
Hazardous location certifications
Refer to product label for applicable approvals.
Approval / Item
cCSAus explosion-proof
with IS outputs
ATEX / IEC Ex flameproof
with IS outputs
NEMA enclosure type
Class II and III installations and for Type 4X/IP66 applications require that all cable and unused entries be sealed with
a Zone 1 certified seal fitting. Seal fittings are supplied by Honeywell.
Radio certifications
Agency
Federal Communications
Commission (FCC)
Industry Canada (IC)
Ratings
Item
Process connections
Temperature limits
Entry plugs
Field wiring
(supplied by others)
2
Honeywell • Sensing and Control
Ratings / Description
CLASS I, DIV 1 GROUPS B, C, D, T6
CLASS II, DIV 1 GROUPS E, F, G
CLASS III
CLASS 1 ZONE 1 A/Ex d [ia] IIC T6
CLASS II ZONE 21 AEx tD [iaD] 21 T85C
DIP A21 IP66 T85C
Tamb -40°C to +70°C
Ex d [ia] IIC T6 Gb
EX tb IIIC T85°C IP66/67 Db
Tamb -40°C to +70°C
Types 1, 3, 4, 4X, 6, 6P, 13 and IP66/67
Certification
Description
The WCX Series valve position sensors comply with part 15 of the
FCC rules. Operation is subject to the following two conditions.
DSSS FCC ID:
(1) this device may not cause harmful interference, and
S5750025034
(2) this device must accept any interference received, including
interference that may cause undesired operation.
The installer of this radio equipment must ensure that the antenna
is located or pointed such that it does not emit RF fields in excess
DSSS IC ID:
of Health Canada limits for the general population; consult Safety
573I-50025034
Code 6, obtainable from Health Canada's web site
http://www.hc-sc.gc.ca/rpb
Ratings/Description
n/a
Max process temperature
Ambient temperature limits cold:
Ambient temperature limits hot:
3/4 NPT or M25
Conduit (explosion proof not required)
Cable gland
50040850
Issue 3
WCX
n/a
n/a
-40 °C
70 °C
1
n/a
n/a