Operation Panel - Panasonic NA-F100A2 Service Manual

6. OPERATION PANEL

NA-F100A2
Change water
amount
During the wash
process, press "Water
Level" to change the
water amount.
● Some water amounts
cannot be selected
depending on the
program.
● When the remaining
time is displayed,
press "Water Level"
to check the water
amount.
Air Dry (P.12)
Child Lock lamp (P.13)
Change process
settings
Change the combination of wash,
rinse and spin processes, and the
time length or number of times for
individual processes. (P.12)
Lighted
Flashing (in progress)
● After starting operation, you
can change settings only during
w a s h p r o c e s s b y p r e s s i n g
"Start/Pause".
Service NA-F100A2.indd 9 Service NA-F100A2.indd 9
Water amount/
remaining time
After starting operation, indicates
the water amount according to
the amount of laundry.
After approx. 5 seconds, indicates
the approximate remaining time
(min).
Start/Pause
Preset
Set the time to finish washing (in
hours). ( lights.)
e.g.) 8 hours later
● Setting range: 2 - 24 hours later,
in one-hour increments. (3 - 24
hours later for the Power wash
+ Soak program)
● Not available for the following
programs:
Delicate, Fragrance, Blanket,
Tub Hygiene, Air Dry
- 9 -
Water level/water amounts
High Mid
Level
10-8 7-5
Detergent*
Water amount
72 59 55 51 47 43 38 33 27
(L)
* : 1 scoop of detergent
● Each water level, except "Extra Low", has
three water amount options that can be
switched while the level is lit by pressing
"Water Level".
Extreme Wash (P.11)
Program selection
NOTE
● In case of a power failure
during operation, operation will
resume from the point where it
was stopped when the power
is recovered (Auto Restart).
● The power turns off
automatically if you do not
press "Start/Pause" within
10 minutes after power-on.
Low Extra Low
4-2 1
14
Power Off/On
4/26/2559 BE 11:50 AM 4/26/2559 BE 11:50 AM