Panasonic NA-F100A2 Service Manual page 18

12.2 H-Error indication
● If there is an operation error or if there is a problem with the washing machine,
- All the switchs cannot be operated.
- An error indication will be displayed.
Indication
Water level sensor
error
H01
Motor triac error
H02
Load relay short
H04
error
The memory circuit
H05
of IC error
Safety switch
H12
connection error
Thermistor error
H17
(for X series)
Overflow error
H21
Service NA-F100A2.indd 18 Service NA-F100A2.indd 18
Content
Check at condition of the connector
Replace the Pressure sensor switch
Replace PCB board
In water drain action check both side of
capacitor that voltage not equal to "0" V.
Replace PCB board
After turn on the Motor for 2 seconds,
capacitor voltage is not "0"
Replace PCB board
Replace Safety switch
Replace PCB board
Check Feed valve and PCB
Replace Feed valve
Check Point
- 18 -
Method to clear
Disconnect the power
plug--->plug in
Disconnect the power
plug--->plug in
Change Capacitor
Disconnect the power
plug--->plug in
Disconnect the power
plug--->plug in
Disconnect the power
plug--->plug in
Disconnect the power
plug--->plug in
4/26/2559 BE 11:50 AM 4/26/2559 BE 11:50 AM