Panasonic NA-F100A2 Service Manual page 10

7. WASHING
After loading laundry
1
● The Normal program is selected when the
power is turned on.
2
■
Timer preset
3
■ After pressing "Start"
● You can change the water level until the
end of the wash process.
● You can change each of the "Wash",
"Rinse" and "Spin" operation contents until
the end of the wash process. Press "Pause"
beforehand.
● You cannot change the program.
According to the water amount indication
4
Put in detergent.
● Approx. 20 seconds after the water amount
is displayed, water supply begins.
Close the lid.
5
Operation ends with beeps.
Service NA-F100A2.indd 10 Service NA-F100A2.indd 10
Timer preset
Turn the power on.
Select a program.
Press the button repeatedly until
the desired program lights up.
Start.
The pulsator moves without
water and measures the amount
of laundry (approx. 5 seconds).
Water amount indication
(approx. 5 seconds)
Remaining time indication
● To check the water amount
→Press "Water Level".
Preparation:
● Check if the washing machine is properly installed.
● Turn on the water faucet.
3
Set how many hours later to fi nish
operation. (P. 9)
● 2 minutes after start-up, all indications except
turn off.
● To confi rm after the timer has been set, press
.
● To cancel or change, press
● The hours that can be set differ depending on
the program.
Fragrance
Use this program to add a particularly large
amount of fabric softener for nice scent and
softness.
When the Fragrance program is
selected
● The buzzer sounds before the final rinse and
operation is paused.
● Put the desired amount of fabric softener which
has been diluted with water directly into the tub.
● Operation will resume if the lid is left closed for
more than 1 hour.
● The Fragrance program cannot be selected when
Child Lock (P. 13) is set.
- 10 -
2 1
.
4/26/2559 BE 11:50 AM 4/26/2559 BE 11:50 AM