Panasonic NA-F100A2 Service Manual page 15

4
5
6
Service NA-F100A2.indd 15 Service NA-F100A2.indd 15
Set to initial mode
for tension of belt
M
Indicate the error
message of the last
time
G
Indicate the
operation times
H
- 15 -
In case to change PCB or
move V-belt. Set the V-belt
tension to initial mode for using
below procedure.
The initial display will be
indicated "b0", after that press
"Start/Pause" button once, it
shall be listened click sound six
times to set properly.
"Digit lights" shall be indicate
"E" initially, press "Wash" button
to show the last error and press
the wash button again to return
to initial mode.
If any error message occurred
in the past, "H" or "U" some
number shall be indicated
alternately.
If no error message occurred,
the light indicates "00".
"Digit lights" shall be indicate
"C" initially, press "Wash"
button to change indication
Digit of operation times.
Press once : Digit "Thousand.
Hundred".
Press twice : Digit "Ten.One".
4/26/2559 BE 11:50 AM 4/26/2559 BE 11:50 AM