Setting Bake - Frigidaire GLEB30S9FSA Control Manual

Setting Oven Controls

Setting Bake

The BAKE Bake pad controls normal baking. If preheating is necessary, refer to the
instructions. The oven can be programmed to bake at any temperature from 170° F to 550° F (The sample shown below
is for 350°F).
INSTRUCTIONS
To set the Bake Temperature to 350°F
1. Arrange interior oven racks and place food in oven.
2. Press Bake , "- - - °" will appear and "BAKE" will flash in the
display (Figure 1).
5
3. Press 3 0 (Figure 2). "BAKE" will continue to flash
and "350°" will appear in the display.
START
4. Press . A beep will sound once the oven temperature
reaches 350° F and the display will show "350°" and "BAKE"
(Figure 3).
Clear
Pressing will cancel the Bake feature at any time.
/Off
To change the Bake Temperature (example:
changing from 350°F to 425°F)
1. After the oven has already been set to bake at 350°F and the
oven temperature needs to be changed to 425°F, press
(Figure4). "- - - ° " will appear and "BAKE" will flash in the
display.
4 5
2
2. Press (Figure 5). "BAKE" will continue to flash
and "425°" will appear in the display.
START
3. Press . "BAKE" and "425°" will stay in the display (See
Figure 6).
Note: If the oven was recently heated from prior cooking and
has remained heated, the bake element symbol may not show
in the display immediately.
(continued)
Bake
7
Pre
Preheat Feature for
Heat
PRESS
Bake
5
3 0
START
Clear
/Off
Bake
4 5
2
START
DISPLAY
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6