Table of Contents
Advertisement
Consumer Defined Controls
Setting Temperature Display — Fahrenheit or Celsius:
The BROIL
Broil
and CLEAN
can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display
in Fahrenheit.
INSTRUCTIONS
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1. To tell if the display is set for Fahrenheit or Celsius press
(figure 1) and hold for 7 seconds; "550°" will appear and
"BROIL" will flash in the display and a beep will sound. If "F"
appears, the display is set to show temperatures in Fahrenheit
(Figure 2). If "C" appears, the display is set to show
temperatures in Celsius (Figure 3).
2. Press
to switch between Fahrenheit or Celsius display
Clean
modes. The display will show either "F" (Figure 2) or "C"
(Figure 3).
START
3. Press
to accept the change or press
change.
(continued)
pads control the Fahrenheit or Celsius temperature display modes. The oven control
Clean
Clear
to reject the
/Off
PRESS
Broil
Broil
for 7seconds
Clean
Clear
START
or
/Off
5
DISPLAY
Figure 1
Figure 2
Figure 3
Advertisement
Table of Contents
