Table of Contents
Advertisement
SETTING
POWER
PREHEAT
The POWER PREHEAT pad controls the Power Preheat
feature. The Preheat feature will bring the oven up to
temperature
and then indicate when to place the food in
the oven. Use this feature when recipes call for preheating.
Preheating
is not necessary when
roasting or cooking
casseroles. The oven can be programmed to preheat at any
temperature
between 170°F to 550°F (77°C to 288°C).
To set the Preheat temperature
for 375°F
1.
Arrange the interior oven racks.
2.
Press POWER PREHEAT."350"will appear in the display.
If a preheat of 350°F is needed, press START.
3.
Press 3 7 5.
4.
Press START. "PRE" will be displayed while the oven is
preheating.
5.
Press CANCEL when baking is complete or to cancel
the preheat feature.
After the oven has reached the desired temperature
(this
example, 375o1 :) the control will beep and the "PRE" light
will turn off, the BAKE feature will activate and oven target
temperature will be displayed. Tf you missed hearing the
beep, you can tell that the oven has reached preheat
temperature if you see the oven temperature showing in
the
oven display. Once the oven has preheated, place
food in the oven. The preheat temperature can only be
changed while the "PRE" message is displayed.
To change
Preheat
temperature
while
oven
is
preheating
(ex: changing from 375°F to 425°F)
If it is necessary to change the preheat temperature
while
the oven is preheating to the original temperature:
1.
While preheating, press POWER PREHEAT."375"will
appear in the display.
2.
Enter the new preheat temperature.
Press 4 2 5.
3.
Press START. "PRE" will appear in the display.
Note: A beep will sound once the oven temperature reaches
425°F and the display will show "425 °'.
4.
When baking is complete press CANCEL.
SETTING
BAKE
The BAKE pad controls normal baking. Ira rapid preheating
is preferred, refer to the POWER PREHEAT feature for
instructions. The oven can be programmed to bake at any
temperature from 170°F to 550°F (77°C to 288°C).
Baking Tips:
- Preheat your oven before using the bake mode.
o During preheat, the 3 elements and the convection fan
are used in cycle to quickly heat the oven.
Use only one rack and center the pans as much as pos-
sible on rack 2 or 3.
If using two racks, place the oven racks in positions 2
and 4.
Allow 2" to 4" (5,1cm to 10,2cm) around the utensil(s)
for proper air circulation.
* Be sure the pans do not touch each other, the door,
sides or back of the oven.
To set the Bake Temperature
to 375°F
1.
Arrange interior oven racks.
2.
Press BAKE, "350"will
appear in the display. ]:fa bake
of 350°F is needed, press START.
3.
Press 3 7 5.
4.
Press START. The actual temperature will be displayed.
A beep will sound once the oven temperature reaches
375°F and the display will show "375 °':
5.
Place food in the oven.
Pressing CANCEL will stop the feature at any time.
To change
the Bake Temperature
(example"
changing
from
375°F
to 425°F)
1.
After the oven has already been set to bake at 375°F
and the oven temperature needs to be changed to 425°F
press BAKE and "375"
will appear in the display.
2.
Press 4 2 5. "BAKE" will continue to flash and "425 °"
will appear in the display.
3.
Press START.
The
actual
temperature
will
be
displayed.
While in preheat mode, the convection fan will be activated
during the first rise of temperature
to allow the oven to
reach its target temperature
faster. The Bake, Broil and
Convection
elements will also cycle for a better heat
distribution.
During the first rise of temperature,
the convection fan
will be activated to allow the oven to reach its target
temperature
faster. The Bake, Broil and Convection
elements will also cycle for a better heat distribution.
ii
Advertisement
Table of Contents
