Frigidaire GLEB30S9FSA Control Manual page 17

Oven Cleaning
To Start the delayed Self-Clean Cycle
Speed
The SPEED CLEAN
clean
controls the Delayed Self-Clean operation. The automatic timer will turn the oven on and off at the time you select in
advance. Be sure to review TO START THE SELF-CLEAN CYCLE for recommended clean times.
INSTRUCTIONS
To set the control for the Self-Cleaning Cycle to start
at a delayed time and shut off automatically (example:
3 hour self-clean cycle to start at 4:30)
1. Be sure the clock is set with the correct time of day and the oven
door is closed.
2. Press . "CLEAN" will flash and "3:00" HR will show in the
Clean
display (Figure 1). The control will automatically clean for a 3 hour
period (default self-cleaning cycle time). Note: If a 2 or 4 hour
clean time is desired, press
hour clean time. Set the cleaning time based on the amount of
soil—light, medium or heavy (*See previous page).
START
3. Press .The "DOOR LOCKED" icon will flash; "CLEAN"
icon and the letters "CLn" will remain on in the display (Figure 2).
4. As soon as the control is set, the motor driven oven door lock will
begin to close automatically. Once the door has been locked the
"DOOR LOCKED" indicator light will quit flashing and remain on.
Start
5. Press . Enter the desired start time using the number pads
time
4
3 0 (Figure 3).
START
6. Press . The "CLn" icon will turn off; "DELAY", "DOOR
LOCKED" and "CLEAN" icons will remain on (Figure 4).
7. The control will start the self-cleaning at the set start time, for the
period of time previously selected. At that time, the icon "DELAY"
will go out; "CLn" and oven icon will appear in the display (Figure 5).
When the Self-Clean Cycle is Completed
1. The time of day, "END", "DOOR LOCKED" and "CLEAN" will
remain in the display (Figure 6).
2. Once the oven has cooled down for approximately 1 HOUR, and
"DOOR LOCKED" is no longer displayed, the oven door can then
be opened (Figure 7).
Stopping or Interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a self-cleaning cycle due
to excessive smoke or fire in the oven:
Clear
1. Press .
/Off
2. Once the oven has cooled down for approximately 1 HOUR and
"DOOR LOCKED" is no longer displayed, the oven door can then
be opened (Figure 8).
Note: Self-Clean cycle can never be set to start more than 12 hours in
advance.
(continued)
, CLEAN , MAXX CLEAN
Clean
Speed
for 2 hour or press
clean
Maxx
and START TIME
clean
PRESS
Clean
Maxx
Speed
for a 4
or
clean
clean
START
Start
time
4 3
START
Clear
/Off
17
Start
pads and length of clean cycle,
time
DISPLAY
Figure 1
Figure 2
Maxx
clean
Figure 3
Figure 4
0
Figure 5
Figure 6
Figure 7
Figure 8