Table of Contents
Advertisement
Consumer Defined Controls
Note: The Consumer Defined Control features are adjustments to the control that will not affect cooking results. These
include the Oven Lockout, Silent Control Operation and Temperature Display features.
Setting Oven Lockout Feature
Clear
The
pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and
/Off
prevents the Oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights.
INSTRUCTIONS
To activate the Oven Lockout feature
Clear
1. Press and hold
/Off
2. After 3 seconds "LOC" will appear, a beep will sound and
"DOOR LOCKED" will flash in the display. Once the oven door
is locked the "DOOR LOCKED" indicator will stop flashing and
remain on along with the "LOC".
To reactivate normal oven operation:
Clear
1. Press and hold
/Off
will disepear and "DOOR LOCKED" will flash in the display until
the oven door has completely unlocked (figure 2).
2. The wall oven is again fully operational.
Setting Silent Control Operation
Start
The START TIME
and CLEAN
time
feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be
programmed for silent operation and later returned to operating with all the normal sounds and beeps.
INSTRUCTIONS
To change control from normal sound operation to
silent control operation
1. To tell if your range is set for normal or silent operation press
Start
and hold
. "0:00" will appear and "DELAY" will flash in the
time
display (Figure 3). After 7 seconds ":SP" will appear in the
display (Figure 4).
2. Press
to switch between normal sound operation and
Clean
silent operation mode. The display will show either ":SP" (Figure
4) or ":--" (Figure 5).
If ":SP" appears (Figure 4), the control will operate with normal
sounds and beeps. If ":- -" appears (Figure 5), the control is in
the silent operation mode.
START
3. Press
to accept the change or press
change.
for 3 seconds (Figure 1).
for 3 seconds. A beep will sound. "LOC"
pads control the Silent Control operation feature. The Silent Control operation
Clean
Clear
/Off
PRESS
Clear
for 3 seconds
/Off
Clear
for 3 seconds
/Off
PRESS
START
to reject the
4
DISPLAY
Figure 1
Figure 2
DISPLAY
Figure 3
Start
time
Figure 4
Clean
Figure 5
Clear
or
/Off
Advertisement
Table of Contents
