WilTec TIG180 Operation Manual page 7

•
Keep the safeguards, vents, and motor housing as free of dust and dirt as possible. Rub the
device with a clean cloth and remove rougher dirt with the help of compressed air the pressure
of which should be as low as possible. Hereby, apply the lowest possible pressure.
•
The device should be cleaned after each use.
•
Check the condition of the welding cables, electrode holder, and earth terminal.
•
The electrode holder must regularly be cleaned from weld spatters and contaminations. Apply
release agent after cleaning to reduce adhesiveness for spatters.
•
Worn or damaged insulation of cables and live parts of the device is dangerous and might
cause the device malfunctioning.
•
Check whether all screw, bolts, and nuts are firmly tightened. Should they be loose, re-tighten
them.
Description of the welding machine
This compact welding device is not only ideal for mobile use, but also electrode and TIG welding work
with inert gas can be carried out with the device without any problems.
The device impresses with its ease of use and its high performance, which makes it suitable for both
beginners and professionals. The welding machine has a powerful HF ignition, and the welding current
can also be continuously regulated in a range from 10 to 180 A, so you can easily adapt it to your
needs. In addition, the built-in overheating protection ensures safe working.
Caution: The user must not dismantle, rebuild, or replace electrical components himself. Otherwise,
the guarantee of the device will expire.
Technical specifications
Model
Item number
Power voltage (V)
Frequency (㎐)
Input current (A)
No-load voltage (V)
Output current adjustment range (A)
Rate of work voltage (V)
Duty cycle (%)
No-load loss (W)
Pilot arc model
Efficiency (%)
Power factor
Insulation class
Isolation class
Weight (㎏)
Total dimensions (㎜)
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
TIG180
61707
230
50
180
65
10–180
17
60
40
HF
80
0.93
H
IP21S
10
465×255×330
Item 61707, 61708
TIG200
61708
230
50
200
65
10–200
18
60
60
HF
80
0.93
H
IP21S
11
465×255×330
Page 7
11 2021-1