WilTec TIG180 Operation Manual
Hide thumbs
Also See for TIG180:
- Operation manual (10 pages) ,
- Operation manual (11 pages) ,
- Operation manual (13 pages)
Advertisement
Quick Links
Operation Manual
Welding Machine
61707, 61708
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Related Manuals for WilTec TIG180
Summary of Contents for WilTec TIG180
- Page 1 Operation Manual Welding Machine 61707, 61708 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignificantly. Updating the documentation If you have suggestions for improvement or have found any irregularities, please contact us.
- Page 2 All rights re- served. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 CAUTION: Only use the device according to its intended use listed in this manual. The welding machine must NOT be used • in insufficiently ventilated rooms, © by WilTec Wildanger Technik GmbH Item 61707, 61708 Page 3 http://www.WilTec.de http://www.aoyue.eu 2021-1...
- Page 4 Arc welding creates sparks and drops of molten metal. The welded work piece begins to glow and remains very hot for quite a long time. • Arc welding releases fumes that are potentially harmful. • Any electric shock can be fatal. © by WilTec Wildanger Technik GmbH Item 61707, 61708 Page 4 http://www.WilTec.de http://www.aoyue.eu 2021-1...
- Page 5 If molten or glowing metal or slag particles fall on flammable materials, they can ignite and cause a fire. Therefore, remove all flammable objects from your work area before starting welding work. © by WilTec Wildanger Technik GmbH Item 61707, 61708 Page 5 http://www.WilTec.de...
- Page 6 Cables with worn or damaged insulation and thus live parts of the device are dangerous and can impair the function of the device. • Check that all screws, bolts, and nuts are properly tightened. If they are loose, tighten them securely. © by WilTec Wildanger Technik GmbH Item 61707, 61708 Page 6 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 7 No-load loss (W) Pilot arc model Efficiency (%) Power factor 0,93 0,93 Isolation class Protection type IP21S IP21S Weight (㎏) 465×255×330 465×255×330 Total dimensions (㎜) © by WilTec Wildanger Technik GmbH Item 61707, 61708 Page 7 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 8 • Make sure the power cord is securely connected to the power switch or plug and prevent oxi- dation. Check whether the line voltage is within the wave range. © by WilTec Wildanger Technik GmbH Item 61707, 61708 Page 8 http://www.WilTec.de...
- Page 9 The purpose of the jacket is to protect the weld pool from harmful air ingress and to stabilize the arc. On the other hand, a slag forms that protects and shapes the weldseam. Almost all metals can be welded with electrode welding. © by WilTec Wildanger Technik GmbH Item 61707, 61708 Page 9 http://www.WilTec.de...
- Page 10 Tighten the pressure reducer to the gas cylinder valve so that it is gas-tight. • Screw the union nut of the gas hose connection to the “outlet side of the pressure reducer.” © by WilTec Wildanger Technik GmbH Item 61707, 61708 Page 10 http://www.WilTec.de...
- Page 11 The weldseam is adjusted with the welding current regulator. • Note: Do not touch any cables or plugs while the machine is operating, as this can result in injuries or damages to the machine. © by WilTec Wildanger Technik GmbH Item 61707, 61708 Page 11 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 12 Several connectors have bad contact, especially inserts, etc.; check or out of potentiometer them. control Excessive weld spat- ter/incorrect electrode Electrode is connected incorrectly; replace the earth and handle cables. polarity © by WilTec Wildanger Technik GmbH Item 61707, 61708 Page 12 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 13 This logo indicates that this electric equipment must not be disposed with the domestic waste. The company WilTec Technik GmbH has been registrated in the German registry EAR under the WEEE- registration number DE45283704. Disposal of used electrical and electronic appliances...