Download Print this page

WilTec TIG180 Operation Manual page 3

Arc welder
Hide thumbs Also See for TIG180:

Advertisement

Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manu-
al carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Intended use
This device may only be used according to the intended use. Each use exceeding the intend-
ed use is forbidden!
The user is responsible for damages or injuries of all kind caused by incorrect use.
You may only use welding electrodes suitable for use with the device.
Compliance with the safety, assembly, and operation instructions of this manual is also part of
the intended use.
Persons using and maintaining the device must be familiarised with it and be informed about
all possible dangers. Furthermore, the applicable accident prevention regulations are strictly to
be followed.
You must also obey general instructions on occupational health and safety engineering.
If the device is modified in any way, the manufacturer is no longer to be held responsible for
damages caused by these modifications.
The device is not designed for commercial, artisanal, or industrial use, but for private hob-
by/DIY use only. All further use is explicitly forbidden and is not considered as intended use.
Safety instructions
Read manual!
Use hand protection!
ATTENTION:
Should you hand the device over to a third party, do also hand over the manual/safety instructions. We
are not to be held responsible for any accidents or damages caused by non-compliance with this
manual or the safety instructions.
ATTENTION:
For your own safety, operate the welding machine AFTER reading the safety instructions.
ATTENTION:
Only use the device according to the intended use defined in this manual.
The welding machine must NOT be used
in rooms without sufficient ventilation,
in damp or wet zones,
in explosive zones,
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Use welding mask!
Use hearing protec-
tion!
Item 61707, 61708
Use mask!
Use foot protection!
Use protective cloth-
ing!
Page 3
11
2021-1

Advertisement

loading

This manual is also suitable for:

Tig2006170761708