WilTec TIG180 Operation Manual page 10

Installation scheme
№ Name
1 Pressure regulator
2 Shielding gas cylinder
3 Work piece
Operation
Inert gas arc welding
Errors in the shielding gas supply!
The unhindered shielding gas supply from the shielding gas cylinder to the welding torch is basic for
optimal welding results. In addition, a blocked shielding gas supply can destroy the welding torch!
•
Make all shielding gas connections gas-tight!
•
Before connecting the pressure reducer to the shielding gas cylinder, briefly open the gas cyl-
inder valve to blow out any dirt.
•
Tighten the pressure reducer to the gas cylinder valve so that it is gas-tight.
•
Screw the union nut of the gas hose connection to the "outlet side of the pressure reducer."
•
Gas-tighten the union nut of the shielding gas line to the gas connection on the back of the
welding machine.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
№ Name
4 Welding torch
5 Power supply
Item 61707, 61708 Page 10
11 2021-1