Table of Contents
Advertisement
2
SAFETY
2.1
SAFETY PRECAUTIONS
This section provides important information for safe operation of the IDH.
The equipment described in this manual uses hazardous voltage electricity that
can be dangerous. Local policies and procedures for safely operating any Trebor
chemical heater(s) supersede the safety considerations listed below. It is the
responsibility of all personnel to follow such policies and procedures. All safety
guard devices must be in place when equipment is in operation. Operators, set-
up operators, helpers or installation personnel should not alter, remove or disable
safety devices or equipment.
If the inline heater is used in a manner other than stated in this operation manual,
the protection provided by the heater may be impaired.
2.1.a General Safety
•
There are no serviceable parts inside the heater assembly; never open or
disassemble. Attempting to do so will void the product warranty.
•
Do not attempt to service electrical equipment without proper safety training
and certification or without an understanding of first aid for electrical shock
and hazardous fluid spills.
•
Lockout and tag the electrical and fluid systems prior to installation or
replacement. Refer to your company safety policies and procedures prior to
installation or replacement.
•
Always disengage the heater and optional equipment from electrical and fluid
sources prior to installation or replacement.
•
Always refer to your company safety policies and procedures for flushing and
decontamination prior to removal.
2.2
SAFETY MESSAGE CONVENTIONS
2.2.a Caution
A Caution message indicates a potentially
hazardous situation, which, if not avoided,
could result in minor or moderate injury. It
may also be used to alert against unsafe
practices. A typical Caution message:
MODEL IDH OPERATION / MAINTENANCE MANUAL
PAGE 5
Advertisement
Table of Contents
