Safety; Safety Precautions; General Safety - Idex TREBOR INLINE DI Operation & Maintenance Manual

SAFETY

2
2.1

SAFETY PRECAUTIONS

This section provides important information for safe operation of the ID heater.
The equipment described in this manual uses hazardous voltage that can be
dangerous. Local policies and procedures for safely operating any Trebor
chemical heater(s) supersede the safety considerations listed below. It is the
responsibility of all personnel to follow such policies and procedures. All safety
guard devices must be in place when equipment is in operation. Operators, set-
up operators, helpers or installation personnel should not alter, remove or disable
safety devices or equipment.
If the inline heater is used in a manner other than stated in this operation manual,
the protection provided by the heater may be impaired.
2.1.a General Safety

There are no serviceable parts inside the heater assembly; never open or
disassemble. Attempting to do so will void the product warranty.

Do not attempt to work on or with hazardous chemicals or electrical
equipment without proper safety training and certification, understand first aid
for electrical shock and hazardous chemicals spills.

Lockout and tag the electrical and chemical systems prior to installation or
replacement. Refer to company safety policies and procedures prior to
installation or replacement.

Always disengage the heater and optional equipment from electrical sources
prior to installation or replacement.

Always refer to company safety policies and procedures for flushing and
decontamination prior to removal.
PAGE 6 INLINE CHEMICAL HEATER OPERATION / MAINTENANCE MANUAL