Advertisement
Final assembly
26. final PCB mount
RE-CHECK CAREFULLY THE PCB FOR MOUNTING AND
SOLDERING ERRORS!
Mount the pcb into the enclosure, check the position of the power IC.
The IC support must fit onto the previously inserted hexagonal bolts.
Make sure there is silicone compound between the IC support and the
enclosure!
Glue the included insert C between the transformer and housing.
C
Make sure the PCB is aligned with the back of the enclosure
IMPORTANT: FIRST fix the IC support
THEN fix the pcb using three 5mm spacers + washer.
DO NOT TIGHTEN THESE FIXATIONS YET.
Note: Not all components are visible on the drawing.
16
Advertisement
