Advertisement
Enclosure preparation
25. Enclosure preparation
Cut the thread in the
holes for the enclosure
feet in one of the alu-
minum profiles, using
the supplied special
M4 screw as a tap.
FIG. 1
Mount the feet on the
aluminum profile, using
two M4 hexagonal Allen
screws. Use the supplied
Allen wrench. It is advis-
able to stick the protection
adhesive onto the feet.
FIG. 2
Cut the thread in the front
and back of the aluminum
profiles, using the supplied
special M4 screw (4 holes
per piece)
FIG. 3
13
Advertisement
