ABB HART TTF350 Commissioning Instructions page 41

3.1.2 Pipe installation
Fig. 2: Dimensions in mm/inches
1 Pipe (max. Ø 2 inches)
2 Pipe mount
1. Locate an installation site on a pipe close to the temperature sensor head.
Important
The pipe mount can be attached to a pipe with a maximum diameter of 2" (max. 60 mm).
2. Screw the transmitter to the pipe mount.
3 Attach the pipe mount securely to the pipe with 2 pipe clamps (∅ 10 mm).
Important
The wall and pipe installation set supports variable installation positions. A few examples of
the different options are shown here. The mounting screw allows infinitely adjustable
positioning (0° ... 360°) of the housing.
CI/TTF350-X1
3
2
179 / 7.05
1
TTF350
2
1
179 / 7.05
3 Transmitter TTF350
Installation
3
A00184
EN - 9