Page 1
™ OneSpace is a Trademark of Comfort Products, Inc. ASSEMBLY INSTRUCTIONS MODEL 50-SH0105 SUPPLIER CODE: SPRG LARGE CORNER WALL MOUNT SHELF, BLACK...
Page 2
Shelf maximum weight capacity = 10lbs 2 of 6...
PARTS AND HARDWARE LIST (50-SH0105) EXTRA HARDWARE INCLUDED FOR YOUR CONVENIENCE. ITEMS ARE NOT SHOWN TO SCALE. HARDWARE KIT PART DESCRIPTION STOCK NO STOCK # 51-SH0105HA DESCRIPTION PART End Board 51-SH0105A M5x40MM M3.5x35MM 51-SH0105B Wall Anchor Middle Board Screw Cap...
Page 4
ASSEMBLY INSTRUCTION (50-SH0105) STEP 1 side facing you and place it to the right of the End Board as shown. Using two Screws (1) screw the boards together with the Allen wrench (5). Then, attach one Middle Board (B) to the Shelf (C) using two Screws (1).
Page 5
ASSEMBLY INSTRUCTION (50-SH0105) STEP 4 End Boards (A) and mark the wall behind. Using a drill or a hammer and a nail, make holes in the wall where you have marked. Make sure the drill bit or nail that you use is smaller in diameter than the Wall Anchors (3).
Page 6
10 pounds. For claims or questions concerning this warranty, please visit: www.comfortproducts.net or email us at: customerservice@comfortproducts.net MODEL: 50-SH0105 Comfort Products, Inc. P.O. Box 999 Memphis, TN 38101 www.comfortproducts.net customerservice@comfortproducts.net ™ OneSpace is a Trademark of Comfort Products, Inc. 6 OF 6...
Need help?
Do you have a question about the 50-SH0105 and is the answer not in the manual?
Questions and answers