Häfele FITT-10111 Assembly Manual

Assembly guide
Component parts
1 x Frame (B)
2 x
Door front fixing
bracket (D)
1
Using the runner drilling pattern shown below, fix
the runners (C) to the inside face of the cabinet,
using 4.0 x 15 mm pan head screws (G) to the internal
side of the carcase a minimum of 20 mm up from the
floor level of cabinet.
425
Hole centre distance
2 x Baskets (A)
460
2 x Runners (C)
36
52
77
298
355
420
Front edge of carcase
Sales and Technical Support - Sales and Technical Support -
Tel: 01788 542020, Fax: 01788 544440, E-Mail: info@hafele.co.uk Tel: 01788 542020, Fax: 01788 544440, E-Mail: info@hafele.co.uk
Spirit Level
Bradawl
Did you know Häfele also supply tools to the trade and industry?
475
4 x 6.0 (M6)
150 mm
cabinet
Hexagon nut
width
Hafele Cat. No: 546.21.233
150mm Pull-Out:
Tools required (Not Supplied)
Cross Head Screwdriver
SW4 Allen key
www.hafele.co.uk
See for more information.
• Make sure all the components are included before
you start.
• The number for technical support is at the bottom
of the page.
• Don't rush!
• Read the instructions first.
• Assemble in the stages shown.
• Keep the fittings together to avoid loss.
• Have fun.
15 x Screw
4.0 x 15 mm
(E)
4 x M6
locking washer
(F)
FITT-10111
OLD REF: 500.00-0107
Tape measure
Pencil
6 x Bolts
(G)
6.0 x 10 mm
(H)