Harman Stove Company 44 Magnum Owner's Manual page 8

DO NOT INSTALL A FLUE DAMPER IN THE
EXHAUST VENTING SYSTEM OF THIS
UNIT.
DO NOT CONNECT THIS UNIT TO A
CHIMNEY FLUE SERVING ANOTHER
APPLIANCE.
INSTALL VENT AT CLEARANCES
SPECIFIED BY THE VENT
MANUFACTURER
Fig. 9
Installing Into An Existing Chimney
The chimney connector should extend into the chim-
ney flush with the inside as shown above.
Fig. 9
WARNING
DO NOT INSTALL IN SLEEPING ROOM
CAUTION
The stove is hot while in operation.
Keep children, clothing and
furniture away. Contact may cause
skin burns.
Installing Into An Existing Chimney and Adding a
Liner.
If the chimney condition is questionable or does
not provide enough draft you may want to install a liner.
Fig. 10
8