Table of Contents
Advertisement
Available languages
Available languages
Button Function
* f unction available depending on the Blue-
tooth source used
Fig. 3 Functions of the remote control
3.2.2 Inserting / Replacing the
battery
1) Push the latch of the battery sup-
port to the right (first arrow in fig.
4) and pull out the support (second
arrow).
1.
2.
Fig. 4 Battery support
2) When replacing the battery, remove
the discharged battery.
3) Insert the new battery in the sup-
port, positive pole facing upwards.
Push the support back into the re-
mote control.
Never put batteries in the
household waste. Always dis-
pose of the batteries in accord-
ance with local regulations.
3.3 Initial switch-on and making
settings with the setup
wizard
1) Use the switch POWER to switch
on the unit. The message
and a bar graph will be shown on
the display. Then the setup wizard
will appear:
Setup wizard
Start now?
YES
Notes:
1. T he unit is in the stand-by mode if only
the date and the time are shown on
the display after the switch POWER
was used. In this case, switch on the
unit with the button STANDBY (or
on the remote control).
2 . If
Network settin g s
Please wait
Connectin g .
appears on the display, press the but-
ton MENU, turn the knob CONTROL
SELECT to select the line
and press the knob to call up the
tin g s
menu "System settings". In the menu
"System settings", turn the knob to
select the line
Setup wizard
the knob to call up the setup wizard.
Then continue with step 2.
20
3. I nstead of English, a different menu
4. T he wizard can be called up any time
2)
YES
TROL SELECT to confirm; the wizard
will start and the menu "Date / T ime"
will appear:
The 24-hour format is selected for
the time (indicated by the asterisk
If desired, turn the knob CONTROL
SELECT to select the 12-hour for-
mat. Press the knob to confirm the
format selected.
3) The menu for the automatic time
update will appear:
The current setting is indicated by
the asterisk
date via the Internet).
The other options are:
Automatic time update via DAB sta-
W ELCOME
tion or FM station or manual time
setting (
N ote: The time will only be updated au-
tomatically when a corresponding sta-
tion is received. Therefore select the set-
ting that corresponds to the operating
mode most frequently used: If you listen
NO
to the digital radio for most of the time,
for example, select
you mainly listen to the Internet radio,
leave the setting
changed.
Confirm the current setting or se-
lect and confirm a different setting.
Depending on the setting selected,
one of the following menus will be
shown:
System set-
and press
language can be set (see chapter
3.4.1).
via the menu "System settings".
is selected. Press the knob CON-
Date/Time
12/24 hour format
12
24*
Auto update
Update from DAB
Update from FM
Update from Network
*
No update
(automatic time up-
*
).
No update
Update from DAB
Update from Network
or
Update from DAB
FM
No additional time settings are
required. Continue with step 4.
The menu shown there (fig. 11)
will appear.
Update from Network
The menu "Set timezone" will
appear:
Set timezone
UTC +00:00: Dublin, Lon
UTC +00:30:
UTC +01:00: Madrid, A...
UTC +01:30:
UTC +02:00: Athen, Kai ...
For Great Britain, the correct set-
ting has been selected:
UTC +00:00: Dublin, London
Confirm this setting or, for a dif-
ferent country, first select the
appropriate time zone and then
confirm your selection. The menu
"Daylight savings" will appear:
Dayli g ht savin g s
Dayli g ht savin g s
).
*
ON
During the standard time, confirm
the setting
saving time, select and confirm
the setting
ON
4. The menu shown there (fig. 11)
will appear.
No update
The menu for the manual time
setting will appear:
Set Time/Date
01-01-2007
00:00
The digits for the day will flash.
Turn the knob CONTROL SELECT
to set the day and then press the
knob to confirm. The digits for the
month will start flashing. Proceed
in the same way to set the month,
the year, the hours and the min-
utes (and
AM
format has been selected). To re-
turn to the previous setting, press
the button BACK.
, or if
4) When the final time setting has
un-
been confirmed, the menu for per-
manent connection to the network
will appear:
Network settin g s
Keep network connected?
YES*
If
(factory setting) is selected,
YES
the connection to the network will
always be maintained (required
when the unit is to be controlled
via the network, e. g. by means of
the app UNDOK™). If
the connection to the network will
be disconnected when it is not re-
*
OFF*
; for the daylight
OFF
. Continue with step
or
if the 12-hour
PM
NO
is selected,
NO
Advertisement
Table of Contents
