Table of Contents
Advertisement
Available languages
Available languages
connected from the network), a question
mark will be added to their name in the
list. When such a server is selected and
called up, WAP-202RS will try to "wake
up" the server and to establish a connec-
tion. To remove servers with a question
mark from the list, call up the menu item
and then confirm the confirma-
Prune servers
tion prompt with
.
YES
4.4.3 Creating and replaying a
playlist
To replay specific titles from different
folders, a playlist with up to 500 titles
can be created. It is possible to mix ti-
tles from a UPnP-enabled unit (media
server) in the network and from a USB
storage device connected.
Note: The playlist will be deleted when the
unit is switched off with the mains switch
POWER, but will still be available when
the unit is switched to the standby mode.
1) To add a title to the playlist while it is
being replayed or when it has been
selected, keep the knob CONTROL
SELECT pressed until the following
message appears on the display:
Added to My playlist
To add all titles of a folder to the
playlist, select the folder and
keep the knob CONTROL SELECT
pressed until the message above
appears on the display. If the folder
includes subfolders, the titles of the
subfolders will also be added to the
playlist.
N ote: The playlist does not provide any
folder structure; the titles will be added
to the playlist one after the other.
2) To replay the playlist, press the
button MENU (the menu shown in
fig. 41 will appear) and then use the
line
to call up the list. The
My playlist
first title will be selected. Press the
button CONTROL SELECT to start
the replay or first select a different
title to start with.
An overview of the operating
functions and displays can be found
in chapter 4.4.4.
3) To remove a title from the list, select
the title from the list and keep the knob
CONTROL SELECT pressed until
the following confirmation prompt
appears on the display:
Delete from My playlist?
Confirm with
YES
4) To delete the entire playlist, press
the button MENU and then select
and call up
Clear My playlist
mation prompt will be shown on
the display; confirm the prompt to
delete the list.
28
4.4.4 Displays and functions
Music player
Come on my friends
0:26
The lower line of the display indicates
the source of replay (
title name (or the title name and the
artist name for a
played of the title (numerically and by
means of a bar graph) and the total
playing time are shown.
Four replay modes are available:
–
–
–
–
* i f the title is included in a folder
(if the folder includes subfolders, the titles of
the subfolders will not be replayed)
To set the replay mode desired, use the
corresponding buttons ( table, fig. 45)
or the menu items
fle Play
41): Turn the knob CONTROL SELECT
to select the appropriate line and press
the knob to set the function to
Button
INFO
REPEAT
SHUFFLE
PLAY
at the unit only
PREV/ NEXT
or cancel with
.
NO
on the remote control only
. A confir-
I / I
/
Fig. 45 Functions of the music player
12:41
3:12
U S B
or
USB
source), the time
UPnP
or not shown
All titles (of the current folder)* are
replayed one after the other.
("Shuffle")
All titles (of the current folder)* are
replayed once in random order.
("Repeat")
All titles (of the current folder)* are
continuously replayed one after the
other.
and ("Shuffle" and "Repeat")
All titles (of the current folder)* are
continuously replayed in random
order.
Repeat Play
in the highest menu level (fig.
Function
press repeatedly to show
various title information
(if available)
continuous replay
replay in random order
pause / replay
press the button briefly to
go to the previous / next
title
keep the button pressed
for fast reverse / forward
previous / next title
fast reverse / forward
4.5 Replay of a Bluetooth
source
To replay audio files from a Bluetooth
source (e. g. smartphone or tablet
computer), press the button MODE re-
peatedly until
the display. Then the following menu
will appear:
). The
UPnP
Bluetooth
Bluetooth
Today s Date:
26/10/2019
The Bluetooth symbol in the lower
line will flash as long as there is no
Bluetooth connection.
Activate the Bluetooth function at
the Bluetooth source. In the list of the
units available, WAP-202RS will be
indicated by the name "BLUE". Pair
the Bluetooth source with "BLUE" (
refer to the manual instructions of the
Bluetooth source, if required). Once the
pairing has been made, the Bluetooth
symbol will stop flashing.
To control the replay (replay / p ause,
previous / next title, fast reverse / for-
ward), either use the Bluetooth source
or the appropriate buttons at the unit
or on the remote control ( function
overview of the buttons in fig. 45).
The functions available depend on the
Bluetooth source used.
and
Shuf-
or
.
On
Off
4.6 Replay of an audio source
connected to the AUX input
To reproduce the sound of an audio
source connected to the jack AUX
INPUT, press the button MODE repeat-
edly until
Aux in
Then the following menu will appear:
Auxiliary input
Audio In
Today s Date:
26/10/2019
4.7 Sleep timer function
The unit can automatically go to the
standby mode after an adjustable time
appears on
Bluetooth Audio
09:33
appears on the display.
18:36
Advertisement
Table of Contents
