Table of Contents
Advertisement
Available languages
Available languages
Internet Radio Receiver
These instructions are intended for
users without any specific technical
knowledge. To set up the unit, users
should be familiar with the basic set-
tings of their Internet router. Please
read these instructions carefully prior
to operation and keep them for later
reference.
1 Applications
The Internet radio receiver WAP-
202RS a llows to access thousands of
radio s tations and podcasts worldwide
via the I nternet. Specific station names,
genres or locations can be searched.
The connection to the Internet router
can be e stablished via cable (LAN) or
via wireless LAN.
In addition, the unit offers the following
features:
– Reception of FM stations and digital
radio stations (DAB / DAB+)
– Replay of audio files on a USB stor-
age medium or a media server in the
local network (e. g. computer)
– Replay of Bluetooth sources
– Replay of an audio source connected
(e. g. MP3 player)
– Two alarm clocks that can be indi-
vidually set
– Sleep timer function
– Possibility to control the unit by
means of a smartphone or tablet via
the app UNDOK™ (available free of
charge)
– Multi-room support
– RS-232 interface for remote control,
e. g. via a computer
1.1 Conformity and approval
Herewith, MONACOR INTERNA-
TIONAL declare that the product
WAP-202RS complies with the direc-
tive 2014 / 53 / EU. The EU declaration
RS-232
18
of conformity is available on the In-
ternet:
www.monacor.com
The product is generally approved
for operation in EU and EFTA coun-
tries; the operation of the product is
licence-free and requires no registra-
tion .
2 Safety Notes
The product corresponds to all relevant
directives of the EU and is therefore
marked with .
WARNING The product uses dan-
The product is suitable for indoor
•
use only. Protect it against dripping
water, splash water and high air
humidity. The admissible ambient
temperature range is 0 – 40 °C.
•
Do not place any vessels filled with
liquid on the product, e. g. a drinking
glass.
The heat produced inside the prod-
•
uct must be dissipated by air circu-
lation; therefore, never cover the air
vents.
Do not use the product and imme-
•
diately disconnect it from the power
supply
1 . if the unit or the power supply
cable is visibly damaged,
2 . if a defect might have occurred
after the unit was dropped or suf-
fered a similar accident,
3 . if malfunctions occur.
Any repairs must be carried out by
specialists.
WLAN
LINE OUTPUT
ANTENNA
L
LAN
R
gerous mains voltage.
Leave servicing to skilled
personnel and do not in-
sert anything into the air
vents; inexpert handling
may result in electric
shock.
BT
ANTENNA
FM
ANTENNA
+
15 V
−
Never pull the mains cable to discon-
•
nect the mains plug from the socket,
always seize the plug.
For cleaning only use a dry, soft cloth;
•
never use water or chemicals.
No guarantee claims for the prod-
•
uct and no liability for any resulting
personal damage or material dam-
age will be accepted if the product
is not correctly used or not expertly
repaired.
If the product is to be put out of
operation definitely, dispose of
the product in accordance with
local regulations.
3 Before Operation
3.1 Setting up and
connecting the unit
The unit can be installed into a rack
(482 mm / 19") by means of the mount-
ing brackets. For rack installation, 1 RS
(rack space = 44.45 mm) is required.
However, the unit can also be placed
as a tabletop unit.
Prior to connecting / disconnecting,
switch off all units involved.
1) Connect the RCA jacks LINE OUT-
PUT to the line input of an amplifier
(or a different subsequent unit such
as an active speaker system, mixer).
2) For replay via headphones, connect
the headphones to the 3.5 mm jack
at the front side of the unit. The
output LINE OUTPUT will be deac-
tivated.
CAUTION Never adjust a very high
headphone volume. Per-
manent high volumes
may damage your hear-
ing!
230 V~ /
50 Hz
FUSE
USE ONLY WITH A 250V FUSE
Advertisement
Table of Contents
