Advertisement
4. Remove the PTO shift lever grip () and
cover (2) and pull out the double acting
lever grip (3), draft control lever grip (4) and
position control lever grip (5). Then, unscrew
all the internal fender mounting bolts.
5. Remove the interior fender by pulling it
upward.
A KIT
U89WC9B
B KIT
6. Insert the double acting lever (5) into the
bracket shaft section, fit the rubber washer (7)
and washer (6), and fix it with the snap pin (8).
U89WC20A
7. Remove the double acting bellows (A).
- 4 -
RX SERIES
U89S90A
U89S902A
U89S903A
Advertisement
