Figure 18. Register Value Settings (Part2); Table 2. Example Register Value Settings (Part2) - Abov AT3108U Quick Start Manual

AT3108U Demo board quick start guide
2. Part 2:
A. Write register address and setting value in the Part 2-input window, as shown in Figure
18. Then, press the 'Write' button.
B. Or you can enter Multi-byte data that has the address as a starting address. Then, press
the 'Write' button.
C. Example settings)
In Single Key Result Mode, for the simultaneous keys, the result is always 1 Key
⬧
(initial value).
In Single Key Noise Mode, for the simultaneous keys, the result is Not Touch.
⬧
In Multi Key Mode, for the simultaneous keys, the result is Simultaneous Key.
⬧
Function
SENSITIVITY1 Update
SENSITIVITY1~6 Update
Single Key Result Mode
Single Key Noise Mode
Multi Key Mode
Sleep Mode (Snap Mode)
Fast Mode (Active Mode)
GPIO_CTRL2 Update

Figure 18. Register Value Settings (Part2)

Table 2. Example Register Value Settings (Part2)

Description
02 22
02 44 44 44 44
1F 09
1F 19
1F 0D
06 00 04
06 80 00
0D F0
3. Building and running project
Remark
Start F0 02 22 Stop
Start F0 02 44 44 44 44 Stop
Start F0 1F 09 Stop
Start F0 1F 19 Stop
Start F0 1F 0D Stop
Start F0 06 00 04 Stop
Start F0 06 80 00 Stop
Start F0 0D F0 Stop
19