3. Building and running project
3.1.2
Hardware components of the Shield Board
1.
AT3108 (16-QFN) chip: Touch Sensing 8CH (channel) and LED 1 pins are supported.
2.
The 2mm (2T) Thick plastic cover is attached to the Touch PAD.
Function
Touch Key
GPIO
External Interface
10
Table 1. Touch Demo Board Description
Description
Remark
User SW
Touch Only Pin (CS0 to CS7)
User SW
OUT1
User SW
VDD, GND, INT,SDA, SCL, I2C_EN, RESET, OUT_MODE
Figure 7. Touch Demo Board Description
AT3108U Demo board quick start guide