Table of Contents
Advertisement
3. Building and running project
3.4
AT GUI program practice
3.4.1
Run the AT GUI program
1.
Run the AT GUI program by double clicking over the icon shown in Figure 11.
2.
After the program starts, the COM port number is displayed on the screen as shown in Figure
12.
A.
Click on the 'RUN' button.
B.
Click on the 'AT3108' button, regardless of whether it is before or after the 'RUN' button.
C. Click on the 'Accept' button after marking the 'Key' box.
14
Figure 11. AT GUI Program Icon
Figure 12. AT GUI Program Menu
AT3108U Demo board quick start guide
Advertisement
Table of Contents
