SOMFY Telis Soliris 4 RTS Patio Quick Start Manual
  1. Manuals
  2. Brands
  3. SOMFY Manuals
  4. Remote Control
  5. Telis Soliris 4 RTS Patio
  6. Quick start manual

SOMFY Telis Soliris 4 RTS Patio Quick Start Manual

Hide thumbs
1
2
3

Advertisement

Table of Contents

Part Number:
1811243
Introduction - Multi-Channel Remote Control
Telis Soliris 4 RTS Patio with Sun/Wind function
Up Button
Center "my" Button
Down Button
Wind Only
Programming and Operating

Programming a new remote

1. With the current remote press the Channel Selector Button. Each channel operates a single window
or group of window coverings. LED lights will illuminate, indicating which channel is being operated.
2. Using a paper clip, pen or similar device, press and hold the Programming Button on the back of your
current remote until your window shade moves up and down quickly.
3. On the new remote, select a channel to assign the window covering to. Using a paper clip, pen, or
similar device, press and hold the Programming Button on the back of the new remote. The window
shade will move up and down quickly.
4. The new remote is now programmed to operate your window covering.
Note: repeat process for the other
window coverings/channels.
Telis Soliris 4 RTS Patio
The Telis Soliris RTS Patio is a hand-held remote to operate awnings, screens and
shutters featuring Radio Technology. It also has the added feature of activating an
RTS sun sensor remotely. The RTS is omni-directional, so there is no need to aim
the remote at the product being controlled.
Sun & Wind
Sun/Wind/Channel
Selector
Continued On Next Page
Programming
Button (PROG)
Back
page 1 of 3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Telis Soliris 4 RTS Patio and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for SOMFY Telis Soliris 4 RTS Patio

Summary of Contents for SOMFY Telis Soliris 4 RTS Patio

  • Page 1 RTS sun sensor remotely. The RTS is omni-directional, so there is no need to aim the remote at the product being controlled. Introduction - Multi-Channel Remote Control Telis Soliris 4 RTS Patio with Sun/Wind function Up Button Center “my” Button Down Button Sun &...
  • Page 2 Programming and Operating Continued Programming Favorite Position with Remote The remote operates interior and exteriors shading solutions. Each is operated by a channel. 1. Press the Channel Selector Button. The LED lights will illuminate, indicating which channel is being operated. 2.
  • Page 3 Battery Installation Replacing the Battery 1. Using a small screwdriver, loosen the screws on the reverse side of the remote control and remove the back cover. 2. Replace the battery with one 2430 Lithium 3V battery BATTERY RECYCLING OR DISPOSAL Note: Visit https://store.somfysystems.com/ to Discard batteries and electrical components purchase an additional or replacement product.

This manual is also suitable for:

1811243

Table of Contents