SOMFY Telis 1 Chronis RTS Quick Start Manual
  1. Manuals
  2. Brands
  3. SOMFY Manuals
  4. Remote Control
  5. Telis 1 Chronis RTS
  6. Quick start manual

SOMFY Telis 1 Chronis RTS Quick Start Manual

Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

Part Number:
1811243
The Telis 1 Chronis RTS remote control and timer provides control of a single or a group
of window coverings in the same room. The Telis 1 Chronis RTS can be used in manual
or automatic mode. Manual mode controls the window coverings paired with the
remote control. Automatic mode allows you to control window coverings paired with
the remote control, using preprogrammed factory settings. Operators can customize
the daily and weekly schedules in the "work" program.
Caution: To avoid damaging the product:
1. Do not drop or strike.
2. Keep away from moisture and liquid.
3. Do not clean with abrasive cleaning products or solvents. Only use a soft, damp cloth.
4. Keep out of the reach of children.
Telis
1 Chronis RTS
®
Included:
A.
Telis 1 Chronis RTS
B.
Wall mount with screw cover
C.
Screw kit
D.
2 -LR03 AAA batteries
2 x LR03
AAA 1.5v Batteries
page 1 of 8

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Telis 1 Chronis RTS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for SOMFY Telis 1 Chronis RTS

Summary of Contents for SOMFY Telis 1 Chronis RTS

  • Page 1 ® 1811243 The Telis 1 Chronis RTS remote control and timer provides control of a single or a group of window coverings in the same room. The Telis 1 Chronis RTS can be used in manual or automatic mode. Manual mode controls the window coverings paired with the remote control.
  • Page 2 Introduction Red indicator light Selection button Arrow buttons Up/Switch On/Open/Retract window coverings “my” button Stop/Go to favorite “my” position Down/Switch Off/Close/Extend window coverings Programming (PROG) button Battery compartment cover LCD Screen Automatic mode indicator Current time Set mode active: SET Low battery symbol Days of the week (work or daily/rest or weekend programming is not displayed in daily programming):...

  • Page 3: Battery Installation

    (e.g. Hi-Fi radio headphones) operating on the same frequency may cause interference and reduce product performance. Caution: Never install the Telis 1 Chronis RTS on or near metal surfaces as this may reduce the signal range. page 3 of 8...
  • Page 4 Programming Set-Up The Telis 1 Chronis RTS screen switches automatically to sleep mode after two minutes of inactivity. When the screen is off or in sleep mode, press any button to turn it on. When editing settings, pressing and holding the selection button (F) allows you to return to manual or automatic mode.
  • Page 5 Programming Continued Programming the days of the week In automatic mode, the Telis 1 Chronis RTS sends automatic commands to one or more window coverings for each day of the week. These automatic commands include: • The same settings for every day of the week (factory setting).
  • Page 6 Programming Continued Deleting an automatic command 1. Using the selection button (F), switch to automatic mode. 2. Press the arrow keys (G) to select the open or close order that you wish to edit (settings for all days or for groups of days if work or weekend days have been configured).

  • Page 7: Operation

    To switch from manual to automatic mode or from automatic to manual mode, briefly press the selection button (F). Manual mode The manual mode of the Telis 1 Chronis RTS is used to: • Send an occasional order to the window coverings. • Deactivate automatic command programming.

  • Page 8: Troubleshooting

    Replace the batteries. The window covering does not react at all when a button The remote control See section "Adding/ deleting on the Telis 1 Chronis RTS transmitter is not a Telis 1 Chronis RTS". is pressed. programmed. External radio equipment...

This manual is also suitable for:

1811243

Table of Contents