Packet Data Access Points - Nokia N82 User Manual

Hide thumbs Also See for N82:
Table of Contents

Advertisement

To edit the settings of an access point, select
Options
> Edit. Follow the instructions from your
service provider.
Connection name
the connection.
Data bearer
— Select the data connection type.
Depending on the data connection you select, only
certain setting fields are available. Fill in all fields
marked with
Must be defined
Other fields can be left empty, unless you have been
instructed otherwise by your service provider.
To be able to use a data connection, your service
provider must support this feature, and if necessary,
activate it for your SIM card.

Packet data access points

Press
, and select
Tools
Connection
Access points
>
New access
point.
Follow the instructions from your service provider.
Access point name
name from your service provider.
User name
— The user name may be needed to
make a data connection, and is usually provided by
the service provider.
Prompt password
password every time you log in to a server, or if you
148
— Enter a descriptive name for
or with a red asterisk.
Settings
>
>
Options
>
>
— You obtain the access point
— If you must enter the
do not want to save your password in the device,
select Yes.
Password
a data connection and is usually provided by the
service provider.
Authentication
your password encrypted or
password encrypted when possible.
Homepage
are setting up, enter the web address or the address
of the multimedia messaging centre.
Select
Options
following settings:
Network type
to transfer data to and from your device. The other
settings depend on the selected network type.
Phone IP address
address of your device.
Edit
or
DNS address
primary and secondary DNS servers, if required by
your service provider. Contact your internet service
provider to obtain these addresses.
Proxy server address
proxy server.
Proxy port number
the proxy server.
— A password may be needed to make
— Select
Secure
Normal
— Depending on the access point you
Advanced settings
>
— Select the internet protocol type
(for IPV4 only) — Enter the IP
— Enter the IP addresses of the
— Enter the address of the
— Enter the port number of
© 2007 Nokia. All rights reserved.
to always send
to send your
to change the

Advertisement

Chapters

Table of Contents
loading

Table of Contents