Packet Data Access Points - Nokia E72 User Manual

create a group that contains various access points, and
define the order in which the access points are used to
connect to a network.
For example, you can add wireless LAN (WLAN) and packet
data access points to an internet access point group and
use the group for browsing the web. If you give the WLAN
access point the higher priority, the device connects to the
internet through a WLAN if available and through a packet
data connection if not.
To create a new access point group, select
Manage New destination.
>
To add access points to an access point group, select the
group and Options New access point. To copy an
>
existing access point from another group, select the
group, scroll to an existing access point, and select
Options Organise Copy to other dest..
> >
To change the priority order of access points within a
group, scroll to an access point and Options
Organise Change priority.
>

Packet data access points

Select Menu Ctrl. panel Settings and
> >
Destinations Access point, and follow the instructions
>
on the display. Or, open one of the access point groups,
select an access point marked with , and select Edit.
Use the instructions provided by your service provider to
edit the following:
Access point name — The access point name is
•
provided by your service provider.
User name — The user name may be needed to make
•
a data connection, and is usually provided by your
service provider.
Cyan Cyan
2009-06-25 13:13:44 P3657 user guide publication 3
Prompt password
•
ask for a password every time you log in to a server, or
if you do not want to save your password in the device,
select Yes.
Password — A password may be needed to make a
•
data connection and is usually provided by your service
provider.
Authentication — Select
•
password encrypted or
encrypted when possible.
Options
>
Homepage — Depending on the access point type you
•
are setting up, enter the web address or the address of
the multimedia message centre.
Use access point — Select
•
the device to ask for confirmation before the
connection using this access point is created, or
Automatically to set the device to connect to the
destination using this access point automatically.
Select Options Advanced settings
>
>
following:
Network type — Select the internet protocol type to
•
transfer data to and from your device. The other
Connection settings depend on the selected network type.
>
Phone IP address (for IPv4 only) — Enter the IP address
•
of your device.
DNS addresses — Enter the IP addresses of the primary
•
and secondary DNS servers, if required by your service
provider. To obtain these addresses, contact your
internet service provider.
Proxy server address
•
server.
Proxy port number
•
proxy server.
Magenta Magenta Yellow Yellow Black Black
— If you want to set the device to
Secure to always send your
Normal to send your password
After confirmation to set
and from the
— Enter the address of the proxy
— Enter the port number of the
47