Connection Settings; Data Connections And Access Points; Access Points; Create A New Access Point - Nokia N82 User Manual

Hide thumbs Also See for N82:
Table of Contents

Advertisement

Connection settings

In connection settings, you can edit access points and
other connectivity settings.
You can also edit settings for Bluetooth connectivity in
the Bluetooth connectivity application.
"Settings", p. 73.
You can also edit settings for data cable connections
in the USB application.

Data connections and access points

Your device supports packet data connections
(network service), such as GPRS in the GSM network.
When you use your device in GSM and UMTS networks,
multiple data connections can be active at the same
time, and access points can share a data connection.
In the UMTS network, data connections remain active
during voice calls.
You can also use a WLAN data connection. Only one
connection in one wireless LAN can be active at a time,
but several applications can use the same internet
access point.
To establish a data connection, an access point is
required. You can define different kinds of access
points, such as the following:
© 2007 Nokia. All rights reserved.
See
See "USB", p. 76.
MMS access point to send and receive multimedia
messages
Internet access point (IAP) to send and receive e-
mail and connect to the internet
Check the type of access point you need with your
service provider for the service you want to access. For
availability and subscription to packet data connection
services, contact your service provider.

Access points

Create a new access point

Press
, and select
Tools
Connection
Access
>
You may receive access point settings in a message
from a service provider. Some or all access points may
be preset for your device by your service provider, and
you may not be able to change, create, edit, or remove
them.
indicates a protected access point.
indicates a packet data access point.
indicates a WLAN access point.
Tip: You can create internet access points in a
wireless LAN with the WLAN wizard.
To create a new access point, select
access
point.
Settings
>
>
points.
Options
>
New
147

Advertisement

Chapters

Table of Contents
loading

Table of Contents