Make Internet Calls; Service Settings - Nokia N82 User Manual

The list of networks is refreshed automatically every
15 seconds. To refresh the list manually, select
Options > Refresh. Use this option if your WLAN
access point is not shown.
To select an internet call service for outgoing calls if
the device is connected to more than one service,
select Options Change
>
To configure new services, select
Configure service. This option is shown only if there
are services that have not been configured.
To save the network to which you are currently
connected, select Options
saved networks are marked with a star in the list of
networks.
To connect to an internet call service using a hidden
WLAN, select Options
To end the connection to an internet call service, select
Options Disconnect from
>

Make internet calls

When you have activated the internet call feature, you
can make an internet call from all applications where
you can make a regular voice call. For example, in
Contacts, scroll to the desired contact, and select
Options Internet call.
>
© 2007 Nokia. All rights reserved.
service.
Options
>
Save network. The
>
Use hidden network.
>
serv..
To make an internet call in the standby mode, enter
the phone number or internet address, and press the
call key.
To make an internet call to an address that does not
start with a digit, press any number key when the
device is in the standby mode, then press # for a few
seconds to clear the display and to switch the device
from the number mode to the letter mode. Enter the
address, and press the call key.
To make an internet call from Contacts, press
Contacts, scroll to the desired contact, and select
Options Internet
>
To make an internet call from the log, press
Tools Log
>
contact, and select

Service settings

Press , select
tel. Options
>
settings or service-specific settings.
To set internet call as the preferred call type for all
outgoing calls, select
call. When your device is connected to an internet call
service, all calls are made as internet calls.
Call
>
To log in automatically to the internet call service,
select Login type
call.
and the log type, scroll to the desired
Options Internet
>
Tools Connectivity
>
> Settings, and select the default
Default call type
> Automatic. If you use the
, select
, select
call.
Internet
>
Internet
>
123