Advertisement
MONITOR CONTROLS – BACK PANEL
1
1) DC Input Jack - Power source to the monitor. Connect one end to the monitor; the other end to an
electrical outlet.
2) EXT – To connect an external antenna (standard)
3) Video/Audio Output – Use an RCA audio/video cable (not supplied) to connect to a recording device
(eg. Time Lapse VCR).
4) Time Control – Allows you to adjust the dwell time (1-20 seconds), or the amount of time between the
camera automatically switching between channels 1 and 2.
5) Contrast Control – Allows you to adjust the contrast of the picture
6) Camera Inputs – Connect one end of camera to the monitor to receive direct power.
7) V-Hold – Adjust the Vertical Hold on the monitor.
8) Brightness Control – Allows you to adjust the brightness of the picture
WIRED CAMERA CONTROLS
1. Camera Lens – Delivers high quality image by using a 1/4" B/W CMOS Image Sensor
2. LED's - 6 IR LED's for night vision
3. Camera Input – Connect cable to monitor
4. Bracket – Bracket connects to camera for mounting to walls, ceilings or table
5. Microphone – Picks up sound around the camera
2
3
4
5
6
4
7
8
Advertisement
