Honda F220 Owner's Manual page 30

Tilling depth adjustment
Tilling depth can be adjusted by removing the retainer and sliding the
drag bar up or down as necessary.
CAUTION:
• Do not use the tiller with a rotor whose diameter is in excess of 280
mm.
• Operating the tiller on grades could cause the tiller to tip over.
• Allowing any one to operate this tiller without proper instruction may
result in injury.
• Wear sturdy, full coverage footgear. Operating this tiller with bare
feet, or with open toe shoes or sandals increases your risk of injury.
• Do not use the tiller in the night.
• When the rotor is clogged with mud, pebbles etc., immediately stop
the engine and clean the rotor in a safe place. Be sure to wear heavy
gloves when cleaning the rotor.
To prevent damage, check the tiller for any signs of damage or other
faults each time the tiller is used after it has been operated last.
RETAINER
DRAG BAR
27