Memoryconfiguration - AMD 785G User Manual

NB Power Management Features
Dynamic clock gating for IOC/NT/MCU/CFG.
HDMI Audio
Use this item to select HDMI audio, the optional settings are: Disabled and Enabled.
Default is Enabled.
Primary Video Controller
This item is for user to choose primary video controller.
3-6-1 Memory Configuration
CMOS Setup Utility-Copyright(C)1985-2005 American Megatrends. Inc.
DRAM Timing Mode
Memory CLK:
CAS Latency (Tcl):
RAS/CAS Delay(Trcd):
Row Precharge Time(Trp):
Min Active RAS(Trrd):
RAS/RAS Delay(Trrd):
Row Cycle(Trc)
Write Recover Time(Twr)
Bank Interleaving
Channel Interleaving
Enabled clock to All DIMMs
Mem CLK Tristate C3/ATL VID
Memory Hole Remapping
DCT Unganged Mode
Power Down Enabled
↑↓ : Move
Enter: Select
F5: Discard Charges
Bank Interleaving
Use this item to enable bank memory interleaving.
Enable Clock to ALL DIMMs
Enable unused clocks to DIMMS when memory slots are not populated.
Mem CLK Tristate C3 / Alt VID.
Enable and disable Mem CLK Tri-stating during C3 and Alt VID
Memory Hole Remapping
Enable Memory Remapping around Memory Hole.
DCT Unganged Mode
This allows selection of unganged DRAM MODE (64- bit width).
Auto=Ganged Mode; Always= Unganged Mode.
Power Down Enable
Memory Configuration
Auto
800MHz, N/A
6CLK N/A
6CLK, N/A
6 CLK, N/A
15CLK, N/A
4CLk, N/A
21 CLK, N/A
6CLK, N/A
Auto
XOR of Address b
Disabled
Disabled
Enabled
Always
Enabled
+/-/: Value F10: Save
F6: Standard Defaults
24
Help Item
Options
Auto
DCT0
ESC: Exit F1: General Help
F7: Optimized Defaults