Nilfisk-Advance Advance BU800 How-To

Unplug battery charger
1
Wrap cord accordingly.
4
Inspect pad for wear.
7
Tighten pad retainer in
clockwise direction.
10
Palm buttons power the
pad drive and causes
the pad to spin and
lower to the floor
(
models without traction
All manuals and user guides at all-guides.com
BU800 Battery Burnishers How To
Prepare for use
Check/inspect bag.
.
2
Replace bag if needed.
5
Turn pad retainer
counter clockwise to
remove the pad.
8
Prep area to remove
debris.
11
Turn on pad power
switch. Press palm
buttons to drive
machine and lower pad
). to the floor
3
6
9
12
(traverse models)
Remove the skirt.
Install new pad and
center on outside
diameter of the pad
driver.
Turn the key switch to
turn the machine on.
Check battery power.
Press the speed control
button to adjust traverse
speed.
Press the reverse button
while pressing palm buttons
machine in
to move the
reverse