Mercedes-Benz M-Class Owner's Manual page 305

Stowage areas
302
To retract: unhook the luggage compart-
X
ment cover from retainers ; on the left
and right and guide it forwards by grab han-
dle : until it is fully retracted.
Fitting/removing luggage compart-
ment cover (without integrated safety
net)
To remove: make sure that luggage com-
X
partment cover : is rolled up.
Press in end cap = of luggage compart-
X
ment cover : on the right or left side in
the direction of the arrow and press lug-
gage compartment cover : into anchor-
age ; opposite it.
Remove luggage compartment cover :.
X
To fit: set luggage compartment cover :
X
on the right or left-hand side in anchor-
age ;.
Push in opposite end cap = of luggage
X
compartment cover : in the direction of
the arrow and insert luggage compartment
cover : into opposite anchorage ;.
Fitting/removing combined luggage
cover and net (luggage compartment
cover with integrated safety net)
You can install and remove the combined lug-
gage cover and net from the luggage com-
partment.
Make sure that the safety net and the lug-
X
gage compartment cover are rolled up.
To remove: press button ;.
X
Swing the combined luggage cover and net
X
in the direction of the arrow.
First, detach the combined luggage cover
X
and net from left-hand catch : and then
remove it from right-hand fixture =.
To install: push the combined luggage
X
cover and net up to the stop into right-hand
fixture =.
Place the combined luggage cover and net
X
into the left-hand fixture and push it into
catch : until the combined luggage cover
and net engages audibly.
Make sure that red lock status indica-
X
tor ? is no longer visible. The combined
luggage cover and net will otherwise not be
locked in place.