Mercedes-Benz M-Class Owner's Manual page 228

From LOW RANGE to HIGH RANGE
! Only carry out the gear change process if:
the engine is running
R
the transmission is in position N
R
you are not driving above 70 km/h
R
Press LOW RANGE button :.
X
Indicator lamp ; flashes.
When the gear change is complete, indica-
tor lamp ; goes out. In the multifunction
display, the LOW RANGE Off
appears and status indicator = goes out.
While indicator lamp ; is flashing, you can
cancel the gear change by pressing LOW
RANGE button : again.
Messages in the multifunction display
If a gear change process has not been suc-
cessful, the following messages may be dis-
played in the multifunction display:
LOW RANGE Max. speed 40
been driving above 40 km/h. Indicator
lamp ; also flashes.
Drive more slowly to carry out the gear
X
change process.
LOW RANGE Shift to position N
briefly: The transmission is in position D
and you are now driving at below 40 km/h.
Shift the transmission to N to complete the
X
gear change process.
LOW RANGE Shifting cancelled Please
reactivate: The shifting process has not
been completed.
Maintain all gear change conditions and
X
carry out the gear change process again.
LOW RANGE Stop Apply parking
A warning tone is also heard. The gear change
process has not been completed. LOW
RANGE is in the neutral position. There is no
connection between the engine and the drive
wheels.
! Do not drive any further, otherwise you
could damage the vehicle's drive train.
Stop the vehicle. Take into account the
X
road and traffic conditions when doing this.
Apply the electric parking brake
X
(
Carry out the gear change process again.
X
If the gear change process has been carried
out, the
ing brake
ON&OFFROAD menu in the COMAND
message
display (vehicles with the ON&OFF-
ROAD package)
You can display some driving systems, driving
programs and additional information in the
COMAND display.
km/h: You have
Make sure that the key is in position 2 in
X
the ignition lock.
Make sure that COMAND Online is activa-
X
ted, see the separate COMAND operating
instructions.
Press the : function button.
X
The corresponding displays appear in the
COMAND display:
R
R
brake:
R
R
R
R
R
Off-road driving systems
page 161).
Y
LOW RANGE Stop Apply park‐
message disappears.
level control
steering angle
vehicle's angle of inclination
uphill or downhill gradient in percentage
on-road/off-road program selected
condition of the differential lock for the
transfer case
the LOW RANGE off-road gear is selected
225
Z