Memory Function - Mercedes-Benz M-Class Owner's Manual

The exterior mirror on the front-passenger
side moves back to its original position:
as soon as you exceed a speed of
R
15 km/h
about ten seconds after you have disen-
R
gaged reverse gear
if you press button : for the exterior mir-
R
ror on the driver's side

Memory function

Storing settings
With the memory function, you can store up
to three different settings, e.g. for three dif-
ferent people.
The following settings are stored as a single
memory preset:
position of the seat, backrest and head
R
restraint
driver's side: steering wheel position
R
driver's side: position of the exterior mir-
R
rors on the driver's and front-passenger
sides
G WARNING
The memory function can still be used when
the key has been removed. For this reason,
children should never be left unsupervised in
the vehicle. They could otherwise become
trapped when adjusting the seat or the steer-
ing wheel.
G WARNING
Only use the memory function on the driver's
side when the vehicle is stationary. Other-
wise, you could be distracted from the traffic
conditions by the steering wheel and seat
moving of their own accord, and as a result
cause an accident.
Memory function
Adjust the seat (
X
Y
On the driver's side, adjust the steering
X
wheel ( page 98) and the exterior mirrors
Y
( page 100).
Y
Press memory button M and then press
X
storage position button 1, 2 or 3 within
three seconds.
The settings are stored in the selected pre-
set position. A tone sounds when the set-
tings have been completed.
Calling up a stored setting
Press and hold the relevant storage posi-
X
tion button 1, 2 or 3 until the seat, steering
wheel and exterior mirrors are in the stored
position.
i
The setting procedure is interrupted as
soon as you release the storage position
button.
page 94).
103
Z