After Installation - CeraGem MASTER V4 User Manual

3. Installation
* Please refer to the included assembly guide.
1
Take out the product and its components from the box.
2
Extend the supporting frame and connect the connector cable from
the main body to the supporting frame.
3
Affix the remote control cradle to the side panel with included bolts.
Place the remote control into the cradle.
4
Check the remote control, abdominal vibration projector and
3-sphere projector connector, and connect them correctly.
5
Connect the remote control to the main body
(the remote control should be connected before the power cord).
6
Connect the power cord to the main body and plug into a socket.
14

4. After installation

1
Turn on the power at the side of the main body.
(Please turn off the main power switch when the product is not in use.)
2
Press the power key of the remote control and check whether the
display turns on.
1. The temperature can be adjusted via the remote control to the user's preference and
comfort level.
2. Extend the supporting frame completely before use.
Caution
3. After using the product, turn off the power on the remote control and then turn off
the main body.
정격전압 AC220V, 50/60Hz 소비전력 사용목적 모델명 근육통완화 CGM MB-1901 품목명 제조허가 380VA 개인용온열기 제 697 호
품목허가 등록번호 제인 14-1353 호 R-R-cer-CGMMB-1901 포장단위 1BOX/1SET
제조사 TEL : 041-523-2550 / FAX : 041-523-2560 충남 천안시 서북구 성거읍 정자1길 10 주식회사 세라젬
제조번호 제조년월
* 본제품은 의료기기 입니다.
*For the remote control's screen, refer to page 20.
15