Setting The Intensity - CeraGem MASTER V4 User Manual

3. Using the remote control

Setting the intensity

1. Check the current strength and press the strength
button.
- The current strength of the internal projector will be displayed
on the main screen.
- When the product is closed, the closed product image will be displayed.
2. Adjust the strength to the desired level by repeatedly
clicking the Strength button or toggling between the
up/down button to increase/decrease the intensity.
- The window containing the strength icon and setting will be highlighted
in yellow.
- Strength can be set at Levels 1 ~ 9.
3. Check the changed strength setting on the screen of
the remote control.
22
3. Using the remote control
Setting the thermal sofa mode (supporting mat closed)
1. When the supporting mat is closed, the device can
be operated as a thermal sofa for comfortable seating.
The "thermal sofa" icon will be displayed. When the
remote control is turned on, check the display.
- The abdominal vibration projector and 3-sphere projector will only
be displayed when connected and the position may vary according
to the installation order.
2. To adjust the temperature of the thermal sofa, press
the temperature select button until the desired item is
highlighted in red, then toggle between the up/down
button to increase/decrease the temperature setting.
- When the thermal sofa is in use, the temperature of the internal
projector and the main body mat (preheating) can be adjusted.
Internal projector Main body mat
1
2
Off, 86~149℉
3. After setting the temperature, the current temperature
will be displayed.
- If the remote control is operated while using the product, the time
remaining will be displayed.
Do not use the external projectors (abdominal vibration
projector, 3-sphere projector) on any part of the body for
an extended period of time.
Caution
(There is risk of receiving a burn, even at a low temperature.)
3-sphere Abdominal
Supporting mat
projector vibration projector
Off, 86~140℉
23