Moving The Product - CeraGem MASTER V4 User Manual

3. Using the remote control
Changing a product number
* If there are two or more products in one space, the device number can be changed as required for use of the product.
* Devices can be identified and selected by number when connected via bluetooth.
1. Close the supporting mat and press and hold the
Start/Pause button for about 3 seconds.
2. The current device number appears on the upper left
01
5
side of the screen.
3. Change the device number to the desired number
5
using the up/down button.
- The device number will only appear when setting.
- The device number can be set between No. 01~99.
34

4. Moving the product

1
Disconnect the power cord, remote control, and external projector from the main
body. Close the supporting mat and shift the head cushion back into place.
(To open the supporting mat, pull forward and then lower it.)
Before moving the device, turn off the remote control, turn off the power, wait 10 seconds,
then close the supporting mat and remove all connected accessories.
Caution
2
Lift the device from either end, hands placed beneath the main mat. Move to the
desired location.
- When lifting the equipment, lift with your legs, not your back to prevent injury.
- Be sure to prevent the supporting mat from opening while moving the product.
Caution
①
Waterproof cover
when transporting or storing
35