10780A Receiver Rear Panel Wiring; K15-Volt Power Cable Wiring Diagram - HP 5501A Operating And Service Manual

b
SYSTEM PLUG
OUTER SHIELD
p i i i i i q
MEAS
AND
- S SIGNALS ARE CAPABLE OF
DRIVING ONLY ONE UNIT (10760A, etc.)
10780A
NOTES
1
INNER SHIELD AND OUTER SHIELDS CONNECTED
AT PLUG BODY ONLY
2 BOTH SHIELDS CONNECTED TO PLUG BODY
3 FUSED +15V RET CONNECTED TO BOTH SHIELDS
THROUGH RECEIVER CHASSIS GROUND AND
PLUG BODY
4
FUSED +15V AND +15V RET MAY BE SUPPLIED BY
5501A, OR AN APPROPRIATE +15V POWER SUPPLY
5 REFER
TO 10780A MANUAL FOR DETAILED
10780A PLUG WIRING INSTRUCTIONS
6
DO NOT USE SHIELD AS +15 RETURN LINE
Figure E-5. 70780A Receiver Rear Panel Wiring
CABLE SPEC NO. C07-59995A
lC21-59995A FOR FACTORY
CONFIGURED SYSTEMS)
TO
5501 A
LASER HEAD
[
YEL ] F R O M SUPPLY
f15V POWER
CONNECTOR SYS
f
-
SHIELD: CONNECTED TO CASE AT POWER SUPPLY END.
NO CONNECTION AT LASER HEAD END.
- - -
Figure E-6. +75-Volt Power Cable Wiring Diagram