HP 5501A Operating And Service Manual page 122

3.26 5501A Power
Supply Options
The 5501A Laser Transducer Systems require a k15V Power Supply and a +5V Power Supply. The
Hewlett-Packard power supplies that can be used with the system are62000 series power supplies
with an LED indicator added a s required by FED, RECIST., July 31,1975, Vol. IV-0-148, part 2.
The 5501A power supply options all contain overcurrent, overtemperature, overvoltage, reverse
voltage, and remote sensing protection.
Table 3-6 lists the power supplies available. For additional information and schematics, refer to
the applicable Operating and Service Manual.