Basic Function; Headphone Jack - JVC RC-E451B Instruction Manual

1. FOLDING HANDLE
2. USB PORT
3. CD COMPARTMENT
4. CASSETTE PAUSE KEY
5. CASSETTE STOP/EJECT KEY
6. CASSETTE FAST FORWARD KEY
7. CASSETTE REWIND KEY
8. CASSETTE PLAY KEY
9. CASSETTE RECORD KEY
10. 10/FOLD./MEM.- BUTTON
11. PROG./M./P-MODE BUTTON
12. 10/FOLD./MEM.+ BUTTON
13. /STOP BUTTON
14. /TUN- BUTTON
15. LCD DISPLAY
POWER SOURCE
This unit is designed to be operated on AC/DC.
AC OPERATION
Plug the smaller end of AC power cord into AC jack on unit and the other bigger end into hou-
sehold AC wall outlet. The unit will be automatically disconnected.
DC OPERATION
Open the BATTERY COMPARTMENT DOOR. Install 6 pcs UM-1/D size batteries
(not included) into compartment. Please follow correct polarities as indicated.
CAUTION
• Remove batteries if they are exhausted or long time use.
• Batteries contain chemical substances, so they should be disposed of properly.

BASIC FUNCTION

SWITCHING ON THE UNIT
After connecting the power, press the
the /FUNC. button again to choose FM / TAPE / CD / USB mode.
NOTE: In CD / USB / AUX mode, when the unit is not providing the main function for 15 minu-
tes, the unit will automatically switch into standby mode. In the tape mode, only the tape stops
for 15 minutes, the unit will automatically switch into standby mode. To turn on the unit again,
/FUNC. button or replug the unit.
press
ESD hints – The product maybe reset or not reset to operation of control due to electrostatic discharge,
just switch off and reconnect again.
TO ADJUST VOLUME
Press VOL.+/- button to increase or decrease volume.

HEADPHONE JACK

For private listening, connect a 3.5mm headphone (not included) to the HEADPHONE jack.
The SPEAKER will be automatically disabled.
CAUTION: LISTENING AT A HIGH VOLUME OVER A LONG PERIOD IS NOT GOOD FOR YOUR
EARS.
16. /TUN+ BUTTON
17. /SCAN/PAIR BUTTON
18. VOL+ BUTTON
19. /FUNC. BUTTON
20. VOL- BUTTON
21. SPEAKERS
22. CASSETTE COMPARTMENT
23. AC SOCKET
24. BATTERY COMPARTMENT
25. AUX IN JACK
26. HEADPHONE JACK
27. FM ANTENNA
/FUNC. button to turn on the unit, then press
EN