Parking Proximity Sensor - Renault CLIO 2004 Manual

PARKING PROXIMITY SENSOR

Operating principle
Ultrasonic detectors, installed in
the vehicle's rear
"measure" the distance between the
vehicle and an obstacle whilst
reversing.
This measurement is indicated by
beeps which become more frequent
the closer you are to the obstacle,
until they become one continuous
beep when the
approximately 30 centimetres from
the vehicle.
There is a beep when changing to
reverse gear.
Note: make sure that the ultrasonic
sensors are not blocked (dirt, mud,
snow, etc.).
2.48
bumper,
obstacle is
Operating faults
When the system detects a fault
there will be a 5 second continuous
beep as a warning when reverse gear
is selected. Contact your RENAULT
Dealer.
This function
additional aid
indicates the
between the vehicle and an
obstacle whilst reversing, using
sound signals.
Under no circumstances should it
replace the driver's care or liability
whilst reversing.
The driver should always pay
attention to sudden incidents
during driving: always ensure that
there are no moving obstacles
(such as a child, animal, pram or
bicycle, etc.) or small, narrow
objects such as stones or posts in
your path when manoeuvring.
is an
that
distance